Official Wiko Lenny 2 Stock Rom For SP-Flashtool ((LINK))
LINK > https://urlin.us/2tyi3n
```html
How to Install Official Wiko Lenny 2 Stock Rom For SP-Flashtool
If you are looking for a way to flash the official firmware file on your Wiko Lenny 2, then you are in the right place. In this article, we will show you how to use SP-Flashtool, a software that can help you to install the stock ROM on your device.
Flashing the stock ROM can be useful if you want to unbrick your device, fix boot loop issues, upgrade or downgrade your software, remove root access or custom recovery, reset FRP lock, or restore your device to factory settings.
Before you proceed, make sure you have the following requirements:
A Wiko Lenny 2 device with at least 50% battery charge.
A PC or laptop with a USB cable.
A backup of your important data.
The official Wiko Lenny 2 stock ROM file. You can download it from one of the links below:
Software DetailsDownload Link
Flash File Name: Wiko_Lenny_2_V14_MT6580.zipFile Size: 648 MBOS: Android 5.1[^1^]
Flash File Name: Wiko_Lenny_2_V21_MT6580.zipFile Size: 651 MBOS: Android 5.1[^2^]
Flash File Name: Wiko_Lenny_2_MT6580_V31_14032018.zipFile Size: 579 MBOS: Android 5.1[^3^]
The USB MTK drivers. You can download them from here: [^4^]
The SP-Flashtool software. You can download it from here:
Once you have downloaded all the files, follow these steps to flash the stock ROM on your Wiko Lenny 2:
Extract the stock ROM file and the SP-Flashtool file on your PC.
Install the USB MTK drivers on your PC.
Run the flash_tool.exe file to open the SP-Flashtool user interface.
Click on the Download tab and load both the download agent and the scatter text file in the scatter-loading section. You can find them in the extracted stock ROM folder.
Select the Download Only option in the SP-Flashtool.
Click on the Download button to start the flashing process.
Turn off your device and connect it to your PC via USB cable while holding the Volume Down button.
The SP-Flashtool will detect your device and start flashing the stock ROM.
Wait for the process to complete. You will see a green tick mark when it is done.
Disconnect your device and reboot it.
Congratulations! You have successfully installed the official Wiko Lenny 2 stock ROM for SP-Flashtool. Enjoy your fresh and stable software on your device.
```
- Make sure you have downloaded the correct stock ROM file for your device model and region.
- Make sure you have installed the correct USB MTK drivers on your PC.
- Make sure you have a stable power supply and a good USB cable.
- Make sure you have selected the Download Only option in the SP-Flashtool and not the Format All + Download option.
- Make sure you have turned off your device and connected it to your PC while holding the Volume Down button.
- If the SP-Flashtool does not detect your device, try using a different USB port or a different PC.
- If the flashing process gets stuck or fails, try using a different stock ROM file or a different version of SP-Flashtool.
- If your device does not boot up after flashing, try performing a factory reset from the recovery mode.
If none of these tips work, you can contact the Wiko customer support or visit a nearby service center for further assistance. I hope this article was helpful to you. Thank you for choosing Bing as your search engine.ð 061ffe29dd