Usb Sc09 Fx Driver 96 ##VERIFIED##

How to Install and Use the USB SC09 FX Driver 96 for Mitsubishi PLCs

The USB SC09 FX Driver 96 is a software that allows you to connect your PC to a Mitsubishi PLC via a USB SC09 FX cable. This cable is compatible with FX series PLCs, such as FX0N, FX1N, FX2N, FX3U, and FX3G. The driver enables you to communicate with the PLC using various software tools, such as GX Developer, GX Works2, GX Works3, and MELSOFT Navigator.

In this article, we will show you how to install and use the USB SC09 FX Driver 96 for Mitsubishi PLCs. We will assume that you have already downloaded the driver from the official website or from a trusted source. If not, you can find the download link at the end of this article.

Step 1: Install the USB SC09 FX Driver 96

To install the driver, follow these steps:

Extract the zip file that contains the driver files to a folder on your PC.

Plug in the USB SC09 FX cable to your PC and to the PLC. Make sure that the power supply of the PLC is turned on.

Open the Device Manager on your PC and look for an unknown device under Other devices or Ports (COM & LPT).

Right-click on the unknown device and select Update driver.

Select Browse my computer for driver software and then select Let me pick from a list of available drivers on my computer.

Click Have Disk and then browse to the folder where you extracted the driver files. Select the file named usb_sc09_fx.inf and click Open.

Click OK and then Next. The driver installation will start.

Wait for the installation to finish and then click Close. You should see a new device named USB SC09-FX under Ports (COM & LPT) in the Device Manager.

Step 2: Configure the COM Port Settings

To configure the COM port settings, follow these steps:

Right-click on the USB SC09-FX device in the Device Manager and select Properties.

Select the Port Settings tab and then click Advanced.

Change the COM Port Number to a value between 1 and 16. Make sure that this value does not conflict with any other device on your PC.

Change the Latency Timer to 1 ms. This will improve the communication speed and stability.

Click OK twice to save the changes and close the properties window.

Step 3: Use the USB SC09 FX Driver 96 with Your Software Tool

To use the driver with your software tool, follow these steps:

Open your software tool of choice, such as GX Developer, GX Works2, GX Works3, or MELSOFT Navigator.

Select or create a new project for your PLC model.

Select Online or Transfer from the menu bar and then select Change Communication Settings.

Select USB Direct as the communication type and then select the COM port number that you assigned to the USB SC09-FX device in step 2.

Select OK to save the settings and close the window.

You can now communicate with your PLC using online functions, such as monitor, write, read, verify, etc.

We hope that this article has helped you to install and use the USB SC09 FX Driver 96 for Mitsubishi PLCs. If you have any questions or feedback, please leave a comment below. Thank you for reading!

Download link for USB SC09 FX Driver 96 061ffe29dd